Rooflights & skylights
Fixed glazed roof elements shaped around the roof form, desired daylight and maintainable junction details.
- Lean-to or pitched geometries
- Panel divisions and perimeter frames
- Roof, curb and flashing interfaces
Daylight & weather-conscious structures
Canopies & Skylights
Jubili coordinates canopies and skylights around shelter, daylight, drainage, access and the complete roof or entrance condition.
Roofs, entrances &
walkways
Slope and junctions matter
Geometry, drainage, flashings, seals and connections to the existing building are reviewed as one weather-exposed system.
Bring in daylight with every edge considered.
Jubili designs and fabricates aluminium-framed canopies and skylights that introduce daylight or provide shelter to entrances and circulation areas.
A successful overhead glazed system needs more than transparent panels. Geometry, supporting conditions, slope, panel divisions, drainage paths, flashings, seals and safe maintenance access all affect the finished result.
The existing roof or wall interface must be inspected before a final method is proposed. Orientation and room use also guide discussions about daylight, glare, heat and the appropriate glazing appearance.
What is the difference between a canopy and a
skylight?
A canopy typically projects over an entrance or outdoor path to provide shelter. A skylight forms part of a roof and introduces daylight into an internal space.
A system shaped around the way the space works.
These are starting points, not fixed packages. Dimensions, configuration, material choices and installation details are developed around the surveyed conditions and agreed scope.
Entrance canopies
Projecting shelters for doors, drop-off points and building entrances with a light architectural character.
- Wall or post-supported concepts
- Glazed or suitable panel appearance
- Edges, gutters and drainage routes
Covered walkways
Aluminium-framed coverage for paths, patios and circulation zones where shelter and openness are both valued.
- Repeated framing bays
- Connections and intermediate support
- Water discharge and access planning
Choose the priority before the detail.
Comparing the intended outcome first makes the eventual specification clearer and more useful.
Start with the outcome
Start with daylight, shelter and the path water must take.
The preferred form should follow orientation, exposure, supporting conditions and maintenance accessâ€â€not appearance in isolation.
-
01
Primary outcome
Rank daylight, weather cover, entrance identity and the area that must remain protected.
-
02
Support & falls
Review spans, fixing zones, slopes, drainage routes and adjoining roof conditions.
-
03
Long-term access
Plan cleaning, seal inspection, leaf build-up and safe reach to overhead surfaces.
Daylight first
Sizes and positions the glazed area to brighten an interior while considering orientation and room use.
- Best suited to
- Stairwells, kitchens and internal corridors
- Plan for
- Heat, glare, cleaning and shading
Shelter first
Prioritises coverage, runoff direction and safe movement beneath an entrance or route.
- Best suited to
- Doorways, patios and walkways
- Plan for
- Wind-driven rain, gutters and discharge points
Feature first
Uses form, rhythm and transparency to create a strong architectural focal point.
- Best suited to
- Atriums, courtyards and lobbies
- Plan for
- Support, junctions and maintenance access
System anatomy
The details behind the finish.
Each line item is considered together. The quotation should record the final selected materials, inclusions, interfaces and responsibilities for the specific site.
Existing structure
Support conditions and suitable fixing points are reviewed before frame geometry and anchoring are finalised.
Slope & drainage
Falls, gutters, outlets and discharge routes are planned to direct water away from sensitive junctions.
Glazing or panels
Appearance, safety, orientation and expected exposure guide the selected infill specification.
Flashings & seals
Perimeter flashings, pressure caps, gaskets and sealant interfaces connect the new system to surrounding construction.
Daylight & comfort
Size, direction, glazing appearance, ventilation and shading influence light, glare and heat inside the space.
Maintenance access
Safe reach to glass, gutters, seals and drainage paths should be considered from the start.
A clear path from idea to installation.
Good fabrication starts with the right information. Each stage narrows uncertainty before site work begins.
What the sequence protects
Geometry, drainage and support are agreed before fabrication.
A deliberate sequence keeps overhead work coordinated with the roof or entrance and makes weather interfaces easier to inspect.
-
01
Condition recordSupports, exposure, drainage, access and surrounding finishes are verified.
-
02
Coordinated conceptFrame, glazing, falls and edge junctions are developed together.
-
03
Weather-checked fitThe installed assembly is aligned, sealed and reviewed at its interfaces.
Inspect
Review roof or entrance conditions, supports, drainage routes, exposure and installation access.
Define
Clarify daylight, shelter, glare, privacy and architectural priorities.
Develop
Plan geometry, slope, framing, fixing points, panel divisions and water paths.
Confirm
Approve glazing or panel type, frame finish, flashings and exact interfaces.
Fabricate
Prepare the aluminium frame and glazing components to the agreed geometry.
Install
Fix, glaze and seal the system, inspect drainage paths and explain maintenance needs.
Materials, spaces and design language.
Glazed-roof and design references from the current library. Site conditions and structural support determine the final geometry of every installation.
Before requesting a quote
Photograph the junctions, not just the opening
Useful photos show the wider roof or wall, possible supports, the area below and where rainwater could discharge. Approximate dimensions help plan the right site survey.
- Wide roof or entrance photos
- Approximate span and projection
- Preferred daylight or shelter goal
- Visible drainage and support points
Canopies & Skylights FAQs
Practical answers to common early-stage questions. Site-specific decisions are confirmed after review.
What is the difference between a canopy and a skylight?
A canopy normally projects over an entrance or outdoor route to
provide shelter. A skylight forms part of a roof and brings
daylight into the building.
Can a skylight be added to an existing roof?
It may be possible after inspecting the roof structure,
waterproofing, drainage, access and internal finishes. No
opening should be proposed before those conditions are reviewed.
How are heat and glare considered?
Orientation, skylight size, shading, ventilation and glazing
choice all matter. Jubili should discuss the desired daylight
level and room use before selecting materials.
Will the system be completely leak-proof?
No responsible supplier should make an absolute promise without
the full site context. Performance depends on appropriate slope,
flashings, seals, drainage, surrounding roof work, installation
and ongoing maintenance.
How should a canopy or skylight be maintained?
Keep glass or panels, gutters and drainage outlets clear, use
appropriate non-abrasive cleaning methods, and arrange
inspection if seals, flashings or fixings show deterioration.
